Started having problems with the clutch. Took a little bit to figure out. Long story short, after a bunch of shifting the clutch pedal would engage almost immediately but the clutch wouldn’t fully engage. As if you were riding the clutch even though your foot was off the pedal.
Found that both the slave and master cylinders were leaking and the fluid was 74k miles old. It was very thick and after it warmed up it wouldn’t release back into the master cylinder. It was still applying pressure to the slave cylinder and not releasing the clutch all the way.
Replaced both cylinders, completely bled the system, and spent way too much time adjusting the pedal.
Replaced clutch system